Supermicro SuperServer CSE-828 828-14 X8QB6-F 6x 3.5" HDD Bay 2U CTO Rack Server

Product Brand: Supermicro
Product Condition: Used
Excluding VAT: £570.00
Including VAT: £684.00
Information

Supermicro SuperServer CSE-828 828-14 X8QB6-F 6x 3.5" HDD Bay 2U CTO Rack Server

Chassis Part number: 8026B-6RF

Model: SuperServer CSE-828

Motherboard Part number: X8QB6-F

In Good Condition And Full Working Order

CTO (Configure To Order)

PLEASE NOTE THAT THIS IS A CTO (Configure to Order) SERVER AND NO CPU, NO MEMORY (BOTH REQUIRED IN ORDER TO OPERATE) AND NO HDD ARE INCLUDED. WE CAN QUOTE TO SUPPLY THESE OR YOU CAN INSTALL YOUR OWN

Specifications
  • 4 x 1567-pin LGA Processor Sockets - Supports Intel Xeon processors 7500 series and Intel Xeon processors E7-4800 family (No Heatsinks)
  • 32 x DDR3 Memory Slots
  • Storage - 6 x 3.5" Hot-Swap SAS/SATA Drive Bays With 6 x 3.5" SATA/SAS Hot-Plug Drive Caddies (No Drives Included)
  • No RAID Card
  • No Optical Drive
  • 2x 1400W 80 Plus Gold Power Supply PWS-1K41F-1R
  • Motherboard - X8QB6-F
  • Super SAS 828TQ Backplane
  • Rack Rails Not Included
  • 2U chassis
Manufacturer Server Chassis Specification:
Motherboard

Super X8QB6-F
Processor/Cache
CPU
  • Quad 1567-pin LGA Sockets
  • Supports up to four Intel® Xeon® 64-bitprocessor(s) of the same type below:
  • Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX)
QPI
  • up to 6.4 GT/s
System Memory
Memory Capacity
  • 32x 240-pin DIMM sockets
  • Supports up to 1024 GB DDR3 ECC Registered memory at 1066/978/800MHz speed
  • Memory Mirroring supported
Memory Type
  • 1333* / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 32GB**
Memory Voltage
  • 1.5 V, 1.35V**
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset
  • Intel® 7500 (Boxboro-EX) chipset
  • ICH10R
SAS
    • Broadcom 6Gbps SAS 2108 controller
    • RAID 0, 1, 5, 6, 10, 50 support
    • BBU (battery backup) extension kit (optional)
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-Port Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16 MB DDR2
Super I/O
  • Winbond 83527HB chip
Input / Output
LAN
  • 3x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 2x USB internal headers (3 ports)
  • Total 5 USB 2.0 Compliant
VGA
  • 1x VGA Port
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 2U Rackmount
Model
Dimensions
Height 3.5" (89mm)
Width 17.2" (437mm)
Depth 27.9" (709mm)
Weight
  • Net Weight: 40 lbs (18.1 kg)
  • Gross Weight: 66.5 lbs (30.2 kg)
Available Colors Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED
Expansion Slots (Low-Profile)
PCI-Express
  • Auto-switch for 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots
Drive Bays
Hot-swap
  • 6x 3.5" Hot-swap SAS/SATA Drives Supported
Backplane
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)
Peripheral Drives
DVD-ROM
  • Slim 8x DVD, 24x CD, DVD-ROM (optional)
System Cooling
Fans 3x 80mm heavy-duty fans with optimal fan speed control; 1x Air shroud
Power Supply
Redundant 1400W high-efficiency power supply with PMBus
AC Input
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output
+5V standby
  • 6 Amp
DC Output
+12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 25 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified
Gold Certified
[ Test Report ]
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN
  • 10x 4-pin fan headers with tachometer status monitoring
  • Low noise fan speed control mode
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 10x fan connectors
Other Features
  • Chassis intrusion detection

Manufacturer Motherboard Specification:
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 16.4" x 16.79" (41.66cm x 42.65cm)
Processor/Cache
CPU
  • Quad 1567-pin LGA Sockets
  • Supports up to four Intel® Xeon® 64-bitprocessor(s) of the same type below:
  • Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX)
QPI
  • up to 6.4 GT/s
System Memory
Memory Capacity
  • 32x 240-pin DIMM slots
  • Supports up to 1024 GB 1066 / 978 / 800MHz DDR3 ECC Registered memory
  • Memory Mirroring supported
Memory Type
  • 1333* / 1066 / 978 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 32GB**
Memory Voltage
  • 1.5 V, 1.35V**
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset
  • Intel® 7500 (Boxboro-EX) chipset
  • ICH10R
SAS
    • Broadcom 6Gb/s SAS 2108 (512MB cache)
    • RAID 0, 1, 5, 6, 10, 50, 60 support
    • BBU (battery backup) extension kit (optional)
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-Port Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16 MB DDR2
Super I/O
  • Winbond 83527HB chip
Input / Output
SAS
  • 8x 6Gb/s SAS / SATA ports
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 3x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 2x USB internal headers (3 ports)
  • Total 5 USB 2.0 Compliant
VGA
  • 1x VGA Port
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
Chassis ( Optimized for X8QB6-F )
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
Expansion Slots
PCI-Express
  • 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN
  • Total of 10 fan headers supporting up to 10 fans
  • Ten 4-pin fan headers
  • 10x fans with tachometer status monitoring
  • Support 4-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
Operating Environment
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered - International Delivery is with UPS
CS 192273

To request a price please fill out the form below...


Close