Supermicro SuperServer CSE-827 1x Node 2x E5-2620v2 32GB Ram 12-Bay X9DRT-HF+

Product Brand: Supermicro
Product Condition: Refurbished
Excluding VAT: £570.00
Including VAT: £684.00
Information
Supermicro SuperServer CSE-827 1x Node 2x E5-2620v2 32GB Ram 12-Bay X9DRT-HF+
Supermicro Chassis Model: CSE-827
Supermicro Node Motherboard P/N: X9DRT-HF+
Supermicro Backplane P/N: Super SAS827HD

In Good Condition, Full Working Order

Tested

Includes:
  • 1 x Supermicro Superserver CSE-827 2U 12-Bay Rack Mount Server Chassis
  • 1 x Server Node With:
    • 2 x Intel Xeon Six-Core E5-2620v2 2.10GHz Processors With 2 x Heatsinks
    • 32GB DDR3 Memory
    • Motherboard - Super X9DRT-HF+
    • Backplane - BPN-ADP-SAS2-L6I rev 1.01
    • 1 x Supermicro AOC-CTG-i2S Dual Port 10 Gigabit Ethernet 10GbE LAN Network Adapter rev 1.00
  • 12 x 3.5" SAS Hard Drive Bays With 12 x 3.5" Caddies
  • Backplane - Super SAS827HD
  • 2 x Power Supplies 1620W PWS-1K62P-1R
Manufacturers Motherboard Specification:
Physical Stats
Form Factor
  • Proprietary Twin
Dimensions
  • 6.8" x 16.64" (17.2cm x 42.3cm)
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
    (up to 130W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM slots
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
    64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602 chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • G200 (Nuvoton WPCM450 BMC with graphic controller)
Super I/O
  • Nuvoton W83527HG
Input / Output
SATA
  • 4 SATA 2.0 ports (3Gb/s)
  • 2 SATA 3.0 ports (6Gb/s)
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 5 USB 2.0 ports total
    (2 rear + 2 via header + 1 Type A)
Video
  • 1 VGA port
Serial Port / Header
  • 1 Fast UART 16550 port
TPM
  • 1 TPM Header
Chassis (Optimized for X9DRT-HF+ )
2U Chassis
  • CSE-217HQ-R1K62MB
  • CSE-827HQ-R1K62MB
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X9DRT-HF+
Model(s)
 
Expansion Slots
PCI-Express
  • 1 x8 PCI-E 3.0 slot
  • 1 x8 Micro Low Profile PCI-E 3.0 slot
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 2x 4-pin fan headers (up to 2 fans)
  • 2x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND
by purchasers in the EU (excluding UK) who are VAT registered
CS 234937 -svr a hs tk 2 frm 234940 (snk-p0048ps) dup cto

To request a price please fill out the form below...


Close