Supermicro SuperServer CSE-827 12-Bay 2-Node Server X9DRT-HF CTO No CPU/RAM

Product Brand: Supermicro
Product Condition: Refurbished
Excluding VAT: £570.00
Including VAT: £684.00
Information
Supermicro SuperServer CSE-827 12-Bay 2-Node Server X9DRT-HF CTO No CPU/RAM
Chassis P/N: CSE-827
Node P/N: X9DRT-HF
In Good Condition, Full Working Order
Tested
2 Year Warranty
CTO Configure-To-Order
CTO Server, no memory, no CPU, no HDD included - required in order to operate, we can quote to supply if required
Included:
  • 1 x Supermicro SuperServer CSE-827 2-Node Server Chassis
  • 1 x 12x 3.5" Bay Backplane BPN-SAS-827HD
  • 12 x Drive Caddies
  • 4 x Fan Modules FAN-0129L4
  • 2 x 1620W Power Supply PWS-1K62P-1R
  • 2 x Server Nodes X9DRT-HF Each With:
    • 1 x Heatsink
    • 16 x DDR3 Memory Slots
    • 1 x 64GB SATADOM-SL 3ME DESSL-64GD07RCADC-B157A
    • 1 x Supermicro Dual Port 10GbE FC SFP+ Network Adapter AOC-CTG-I2S
    • 1 x Backplane Adapter Card BPN-ADP-SAS2-L6I
    • 1 x Fan Module FAN-0139L4
Manufacturers Motherboard Specification:
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 6.8" x 16.64" (17.2cm x 42.3cm)
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
    (up to 135W TDP **)
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
System Memory
Memory Capacity
  • 8x 240-pin DDR3 DIMM slots
  • Up to 512GB DDR3 ECC LRDIMM
  • Up to 256GB DDR3 ECC RDIMM
  • Up to 64GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
    64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602 chipset
SATA
  • SATA 2.0 & 3.0 with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • Matrox G200eW
Input / Output
SATA
  • 5 SATA 2.0 ports (3Gb/s)
  • 2 SATA 3.0 ports (6Gb/s)
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 3 USB 2.0 ports (2 rear + 1 Type-A)
Video
  • 1 VGA port
Serial Port / Header
  • 1 Fast UART 16550 port
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM Header
Chassis (Optimized for X9DRT-HF )
2U Chassis
  • CSE-217HD-R1K28B
  • CSE-217HQ-R1620B
  • CSE-827HD-R1K28B
  • CSE-827HD-R501B
  • CSE-827HQ-R1620B
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X9DRT-HF
Model(s)
 
Expansion Slots
PCI-Express
  • 1 x24 left hand riser + 1 x8 slot for SMCI AOC
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend Static indicator LED
  • UID/Remote UID
Other Features
  • RoHS
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
We can supply this server with a different specification to suit your requirements; more or less memory, different or additional hard drives, additional network cards etc. Please contact us for a quote.
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
CS See RJ -2

To request a price please fill out the form below...


Close