Supermicro Superserver CSE-217 4x Nodes 8x E5-2650v2 256GB Ram 24-Bay X9DRT-HF+

In Good Condition, Full Working Order

Tested

• 1 x Supermicro Superserver CSE-217 2U 24-Bay Rack Mount Server Chassis
• 4 x Server Nodes Each With:
  • 2 x Intel Xeon Eight-Core E5-2650v2 2.60GHz Processors With 2 x Heatsinks
  • 64GB DDR3 Memory
  • Motherboard - Super X9DRT-HF+ rev 1.02
  • Backplane - BPN-ADP-SAS2-L6I rev 1.01
  • 1 x Supermicro AOC-CTG-i2S Dual Port 10 Gigabit Ethernet 10GbE LAN Network Adapter rev 1.00
• 24 x 2.5" SAS Hard Drive Bays With 24 x 2.5" Caddies
• Backplane - Super BPN-SAS217HQ
• 2 x Power Supplies 1620W PWS-1K62P-1R

Physical Stats Form Factor Proprietary Twin Dimensions 6.8" x 16.64" (17.2cm x 42.3cm) Processor/Cache CPU Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP **) Dual Socket R (LGA 2011) Cache Up to 30MB System Bus QPI up to 8 GT/s Note † BIOS version 3.0 or above is required Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support System Memory Memory Capacity 16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM Memory Type 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM Memory Voltage 1.5 V, 1.35 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset Intel® C602 chipset SATA SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Network Controllers Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Video G200 (Nuvoton WPCM450 BMC with graphic controller) Super I/O Nuvoton W83527HG Input / Output SATA 4 SATA 2.0 ports (3Gb/s) 2 SATA 3.0 ports (6Gb/s) LAN 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port USB 5 USB 2.0 ports total (2 rear + 2 via header + 1 Type A) Video 1 VGA port Serial Port / Header 1 Fast UART 16550 port TPM 1 TPM Header

Chassis (Optimized for X9DRT-HF+ ) 2U Chassis CSE-217HQ-R1K62MB CSE-827HQ-R1K62MB Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. SuperServer(s) with X9DRT-HF+ Model(s) SYS-2027TR-H71RF+ SYS-2027TR-H70RF+ SYS-2027TR-HTRF+ SYS-2027TR-D70RF+ SYS-6027TR-H71RF+ SYS-6027TR-HTRF+ SYS-6027TR-D71RF+ SYS-6027TR-D70RF+ SYS-6027TR-DTRF+   Expansion Slots PCI-Express 1 x8 PCI-E 3.0 slot 1 x8 Micro Low Profile PCI-E 3.0 slot System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 Management Software SuperDoctor® III Watch Dog NMI Optional IPMI 1.5 / 2.0 Power Configurations ACPI / APM Power Management Power-on mode for AC power recovery PC Health Monitoring Voltage Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator FAN 2x 4-pin fan headers (up to 2 fans) 2x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED Suspend static indicator LED UID/Remote UID Other Features Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free Operating Environment Operating Temperature Range 10°C - 35°C (50°F - 95°F) Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F) Operating Relative Humidity Range 8% - 90% (non-condensing) Non-Operating Relative Humidity Range 5% - 95% (non-condensing)