Supermicro SuperServer 6028TP-DNCR 2-Node Server X10DRT-P CTO No CPU No Memory

Product Brand: Supermicro
Product Condition: Refurbished
Excluding VAT: £950.00
Including VAT: £1,140.00
Information
Supermicro SuperServer 6028TP-DNCR 2-Node Server X10DRT-P CTO No CPU No Memory
Chassis P/N: 6028TP-DNCR
Node P/N: X10DRT-P
In Good Condition, Full Working Order
Tested
2 Year Warranty
CTO Configure-To-Order
CTO Server, no memory, no CPU, no HDD included - required in order to operate, we can quote to supply if required
Included:
  • 1 x Supermicro SuperServer 6028TP-DNCR 2-Node Server Chassis
  • 1 x 12x 3.5" Bay Backplane BPN-SAS3-827HD2-N4
  • 12 x Drive Caddies
  • 4 x Fan Modules FAN-0162L4
  • 2 x 1600W Power Supply PWS-1K68A-1R
  • 2 x Server Nodes X10DRT-P Each With:
    • 2 x Heatsinks
    • 16 x DDR4 Memory Slots
    • 1 x 64GB SATADOM-SL 3IE3 v2 DHSSL-64GD09BCADCA-B157
    • 1 x Backplane Adapter Card BPN-8S3008N42U-N1
Full Manufacturers specification:
Product SKUs
SYS-6028TP-DNCR
  • SuperServer 6028TP-DNCR
Motherboard (Two per System)

Super X10DRT-P
Processor/Cache (per Node)
CPU
  • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
 
System Memory (per Node)
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices (per Node)
Chipset
  • Intel® C612 chipset
SAS
  • Broadcom 3008 SAS3 (12Gbps) controller;
    RAID 0, 1, 10 support
  • Note: In order to support NVMe drives, both CPU socket must be populated
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output (per Node)
SAS
  • 6x SAS3 (12Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports total (2x rear)
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header (internal)
Others
  • 1x mSATA (full size) and one SATADOM support on the daughter card
  • 1x SATADOM support on the motherboard
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-827HD+-R1K68B
Dimensions and Weight
Width
  • 17.25" (438mm)
Height
  • 3.47" (88mm)
Depth
  • 30.5" (774mm)
Weight
  • Gross Weight: 85 lbs (38.6kg)
  • Net Weight: 66 lbs (29.9 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express
  • 1x PCI-E 3.0 x16 slot
  • 1x PCI-E 3.0 x8 slot
Drive Bays (per Node)
Hot-swap
  • 6x 3.5" Hot-swap drive bays:
    Up to 4x NVMe + 2x SAS3 or 6x SAS3
    Note: NVMe support requires 2 CPUs installed
System Cooling
Fans
  • 4x 8cm heavy duty PWM fans with optimal fan speed control
Power Supply (76mm Width)
1600W 1U Redundant Power Supplies with PMBus
Total Output Power
  • 800W: 100 - 140Vac
  • 1600W: 180 - 240Vac
Dimension
(W x H x L)
  • 76 x 40.4 x 336 mm
Input
  • 100-140Vac / 10-7A / 50-60Hz
  • 180-240Vac / 11-8A / 50-60Hz
+12V
  • Max: 67A / Min: 0A (100-140Vac)
  • Max: 133A / Min: 0A (180-240Vac)
+5Vsb
  • Max: 1A / Min: 0A
Output Type
  • 27 Pairs Gold Finger Connector
Certification Titanium Level
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
We can supply this server with a different specification to suit your requirements; more or less memory, different or additional hard drives, additional network cards etc. Please contact us for a quote.
CS See RJ -3

To request a price please fill out the form below...


Close