|
Supermicro SuperServer 6026TT-HDTRF 2 x System Nodes
In good condition and in full working order
VT Virtualisation VMware ready
Storage: 12 x 3.5" Hot Swap HDD Bays with 12 hot plug drive caddies included - takes standard 3.5" SATA drives
TRAY 1:
2 x Intel QUAD-CORE XEON E5520 2.26Ghz Processors
24GB Ram
2 x 250Gb SATA Hard Drives
(other hard drive configurations are available - please email for quote)
RAID Controller
Dual Gigabit Ethernet
Windows 7 Pro EMB COA License Sticker
(NO OPERATING SYSTEM INSTALLED OR SUPPLIED)
TRAY 2:
2 x Intel QUAD-CORE XEON E5520 2.26Ghz Processors
24GB Ram
2 x 250Gb SATA Hard Drives
(other hard drive configurations are available - please email for quote)
RAID Controller
Dual Gigabit Ethernet
Windows 7 Pro EMB COA License Sticker
(NO OPERATING SYSTEM INSTALLED OR SUPPLIED)
plus all other standard specification
2 x 1400w Power Supplies
| Product SKUs |
| SYS-6026TT-HDTRF |
- SuperServer 6026TT-HDTRF (Black)
|
| Motherboard |
|
| 2x Super X8DTT-HF+ |
| Processor/Cache |
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 130W
- Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
| QPI |
|
| System Memory |
| Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB** , 16GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| On-Board Devices (per Node) |
| Chipset |
- Intel® 5500 (Tylersburg) chipset
- ICH10R
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Dual Intel® 82574L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
| Clock Generator |
|
| Input / Output (per Node) |
| Serial ATA |
- Six Serial ATA ports
- 6 SATA hard drives supported
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Serial Port |
- 1 Fast UART 16550 serial port
|
| System BIOS (per Node) |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| Chassis |
| Form Factor |
|
| Model |
|
| Dimensions |
| Height |
3.5" (89mm) |
| Width |
17.2" (437mm) |
| Depth |
28.5" (724mm) |
| Gross Weight |
85 lbs (38.6kg) |
| Available Colors |
Black |
| Front Panel (per Node) |
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power LED (on power button)
- Network activity LED
- System Overheat/fan fail/power fail/ LED
- UID LED (on UID button)
|
| Expansion Slots (per Node) |
| PCI-Express |
- 2 (x8) PCI-E (FH/HL) w/ riser card (in x16 slots)
|
| Drive Bays (per Node) |
| Hot-swap |
- 6x 3.5" SATA Hot-swap drive bays
|
| Hard drive Backplane |
| 2U Hard drive Backplane |
| Power Supply |
| 1400W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input |
- 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
- 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
|
| DC Output |
- 1100W: +12V/92A; +5Vsb/4A
- 1400W: +12V/116A; +5Vsb/4A
|
| With Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| Certification |
Gold Certified
[ Test Report ] |
| PC Health Monitoring |
| CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
| FAN |
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other Features |
|
| We can supply this server with a different specification to suit your requirements; more or less memory, different or additional hard drives, additional network cards etc. Please contact us for a quote. |
______________________________________________________________________________
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered
Delivery is with UPS
Any Questions? Please call 020 8882 1111 from UK or +44 20 8882 1111 from outside the UK
______________________________________________________________________________
|
