Supermicro CSE-819U X10DRU-i+ 1U Server 2x E5-2640v3 384GB Ram 4x 3.5" HDD Bay

Product Brand: Supermicro
Product Condition: Used
Excluding VAT: £1,995.00
Including VAT: £2,394.00
Information
Supermicro CSE-819U X10DRU-i+ 1U Server

Chassis Part number: CSE-819U

Motherboard Part Number: X10DRU-i+

Backplane Part Number: SAS815TQ


In Good Condition, Full Working Order

Tested

Includes:
  • 2 x Intel Xeon Eight-Core E5-2640v3 2.60GHz Processors
  • 384GB DDR4 Memory
  • 4 x 3.5" SAS/SATA Hot-Swap Hard Drive Bays With 4 x Empty Caddies
  • Onboard SATA 2.0 & 3.0 RAID (RAID 0, 1, 5, 10)
  • 1 x 1U Ultra Riser based on Intel X540 controller with 4 10Gbase-T ports and 1 internal PCI-E x8 3.0 slot AOC-UR-I4XT
  • 1 x 750W Power Supply PWS-750P-IR
  • 8 x Internal Fans
  • Set Of Rails
Manufacturers Specification:

Motherboard


Super X10DRU-i+
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 160W TDP) *

  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required

System Memory
Memory Capacity
  • 24x 288-pin DDR4 DIMM slots
  • Up to 3TB ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
  • 2666/2400 ECC DDR4 NVDIMM
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
  • NVDIMM: 16GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Connectivity
  • 4x 10GBase-T ports via AOC-UR-i4XT
  • Intel® X540 10GBase-T
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output
SATA
  • 4x SATA3 (6Gbps) ports
LAN
  • 4x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 5x USB 3.0 ports

    (2 rear, 2 onboard header, 1 Type A)
Video
  • 1x VGA Connector
Serial Port
  • 1x Serial header
DOM
  • 2x SATA DOM (Disk on Module) support with embedded power
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-819U
Dimensions and Weight
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 29.7" (754mm)
Weight
  • Net Weight: 26 lbs (11.8 kg)
  • Gross Weight: 41 lbs (18.6 kg)
Available Color
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /

    UID LED
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
  • 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)




Drive Bays
Hot-swap
  • 4x 3.5" Hot-swap drive bays
System Cooling
Fans
  • 4x heavy duty fans with optimal fan speed control
  • 4x additional fans optional
Air Shroud
  • 1x Air Shroud
Power Supply
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input
  • 100-127Vac, 50-60Hz
  • 200-240Vac, 50-60Hz
+12V
  • Max: 62.5A & Min: 0A (100Vac-127Vac)
  • Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB
  • Max: 2.1A
  • Min: 0A

























































Motherboard Specification:

Product SKUs
MBD-X10DRU-i+
  • X10DRU-i+
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 17" x 16.8" (43.18cm x 42.67cm)
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
  • Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 160W, 1 QPI up to 9.6GT/s
Cores / Cache
  • Up to 22 cores † / Up to 55MB† cache
Note
  • † BIOS version 2.0 or above is required
Note
  • ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
System Memory
Memory Capacity
  • 1.5TB Registered ECC RDIMM, DDR4-2400MHz; Up to 3TB 3DS ECC LRDIMM, in 24 DIMM slots
Memory Type
  • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 4GB, 8GB, 16GB, 32GB, 64GB
  • LRDIMM: 32GB, 64GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612
SATA
  • Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10
AHCI SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Networking options provided via Ultra Riser
Graphics
  • Aspeed AST2400 BMC
Input / Output
SATA
  • 10 SATA3 (6Gbps) port
LAN
  • 1
USB
  • 3 USB 3.0 ports (2 rear + 1 Type A)
Video Output
  • 1 VGA port
Serial Port / Header
  • 2 COM Ports (1 rear, 1 header)
    2 fast UART 16550 serial
TPM
  • 1 TPM Header & Chip both
Expansion Slots
PCI-E
  • 1 PCI-E 3.0 x32 Left Riser Slot,
  • 1 PCI-E 3.0 x8 Right Riser Slot,
  • 1 PCI-E 3.0 x40 Ultra Riser Slot
  • See Ultra Riser Compatibility Matrix.
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
  • Intel® Node Manager, IPMI2.0, NMI, SuperDoctor® 5, Watchdog
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • +1.8V, +12V, +3.3V, +5V, +5V standby, 3.3V standby, 5+1 Phase-switching voltage regulator, Memory Voltages, Monitors for CPU Cores, VBAT
FAN
  • 8x 4-pin fan headers (up to 8 fans), Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control
Temperature
  • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, Thermal Monitor 2 (TM2) support, PECI, Support to monitor Supermicro AOC temperatures from IPMI or SD 5
LED
  • CPU / System Overheat LED, UID/Remote UID, Memory DIMM ECC error LEDs
Other Features
  • 4x 8-pin GPU power connectors, Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)

















































VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£2100 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by
purchasers in the EU (excluding UK) who are VAT registered


CS 225053 - 225101 -45 a rails + CBL-SAST-0654 dup

To request a price please fill out the form below...


Close