Home / Servers / Servers - Rackmount / Supermicro Rack Servers / Supermicro CSE-819U X10DRU-i+ 1U Server 2x E5-2630L v3 64GB Ram 4x 3.5" HDD Bay

Supermicro CSE-819U X10DRU-i+ 1U Server 2x E5-2630L v3 64GB Ram 4x 3.5" HDD Bay

Name: Supermicro CSE-819U X10DRU-i+ 1U Server 2x E5-2630L v3 64GB Ram 4x 3.5" HDD Bay
Brand: Supermicro
SKU: 64711
Price: 1064.00 GBP
Availability: InStock

mpn: CSE-819U X10DRU-i+ SAS815TQ

product brand: Supermicro

product condition: Used

excluding vat: £886.67

including vat: £1,064.00

information

Supermicro CSE-819U X10DRU-i+ 1U Server

Chassis Part number: CSE-819U

Motherboard Part Number: X10DRU-i+

Backplane Part Number: SAS815TQ

In Good Condition, Full Working Order

Tested

Includes:

2 x Intel Xeon Eight-Core E5-2630L v3 1.80GHz Processors
64GB DDR4 Memory
4 x 3.5" SAS/SATA Hot-Swap Hard Drive Bays With 4 x Empty Caddies
Onboard SATA 2.0 & 3.0 RAID (RAID 0, 1, 5, 10)
1 x 1U Ultra Riser based on Intel X540 controller with 4 10Gbase-T ports and 1 internal PCI-E x8 3.0 slot AOC-UR-I4XT
1 x 750W Power Supply PWS-750P-IR
8 x Internal Fans
Set Of Rails

Manufacturers Specification:

Motherboard

Super X10DRU-i+


Processor/Cache

CPU	Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) * Dual Socket R3 (LGA 2011)
Cores / Cache	Up to 22 Cores† / Up to 55MB† Cache
System Bus	QPI up to 9.6 GT/s
Note	† BIOS version 2.0 or above is required

System Memory

Memory Capacity	24x 288-pin DDR4 DIMM slots Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM
Memory Type	2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 2666/2400 ECC DDR4 NVDIMM
DIMM Sizes	RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB NVDIMM: 16GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors


On-Board Devices

Chipset	Intel® C612 chipset
SATA	SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Connectivity	4x 10GBase-T ports via AOC-UR-i4XT Intel® X540 10GBase-T 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics	ASPEED AST2400 BMC


Input / Output

SATA	4x SATA3 (6Gbps) ports
LAN	4x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port
USB	5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video	1x VGA Connector
Serial Port	1x Serial header
DOM	2x SATA DOM (Disk on Module) support with embedded power


System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1


Management

Software	SuperDoctor® 5 Intel® Node Manager 3.0 Watch Dog NMI SUM and SSM Optional IPMI 1.5 / 2.0
Power Configurations	ACPI Power Management Power-on mode for AC power recovery

Chassis

Form Factor	1U Rackmount
Model	CSE-819U


Dimensions and Weight

Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	29.7" (754mm)
Weight	Net Weight: 26 lbs (11.8 kg) Gross Weight: 41 lbs (18.6 kg)
Available Color	Black


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED


Expansion Slots

PCI-Express	2x PCI-E 3.0 x16 slots (Full-height, 10.5" L) 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)


Drive Bays

Hot-swap	4x 3.5" Hot-swap drive bays



System Cooling

Fans	4x heavy duty fans with optimal fan speed control 4x additional fans optional
Air Shroud	1x Air Shroud


Power Supply

750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input	100-127Vac, 50-60Hz 200-240Vac, 50-60Hz
+12V	Max: 62.5A & Min: 0A (100Vac-127Vac) Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB	Max: 2.1A Min: 0A

Motherboard Specification:

Product SKUs

MBD-X10DRU-i+	X10DRU-i+


Physical Stats

Form Factor	Proprietary
Dimensions	17" x 16.8" (43.18cm x 42.67cm)


Processor/Cache

CPU	Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4. Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 160W, 1 QPI up to 9.6GT/s
Cores / Cache	Up to 22 cores † / Up to 55MB† cache
Note	† BIOS version 2.0 or above is required
Note	** Motherboard supports this maximum TDP. Please verify your system can thermally support.


System Memory

Memory Capacity	1.5TB Registered ECC RDIMM, DDR4-2400MHz; Up to 3TB 3DS ECC LRDIMM, in 24 DIMM slots
Memory Type	2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 4GB, 8GB, 16GB, 32GB, 64GB LRDIMM: 32GB, 64GB 3DS LRDIMM: 128GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors


On-Board Devices

Chipset	Intel® C612
SATA	Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10
AHCI SATA	SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA	SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Networking options provided via Ultra Riser
Graphics	Aspeed AST2400 BMC


Input / Output

SATA	10 SATA3 (6Gbps) port
LAN	1
USB	3 USB 3.0 ports (2 rear + 1 Type A)
Video Output	1 VGA port
Serial Port / Header	2 COM Ports (1 rear, 1 header) 2 fast UART 16550 serial
TPM	1 TPM Header & Chip both

Expansion Slots

PCI-E	1 PCI-E 3.0 x32 Left Riser Slot, 1 PCI-E 3.0 x8 Right Riser Slot, 1 PCI-E 3.0 x40 Ultra Riser Slot See Ultra Riser Compatibility Matrix.


System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1


Management

Software	Intel® Node Manager, IPMI2.0, NMI, SuperDoctor® 5, Watchdog
Power Configurations	ACPI Power Management Power-on mode for AC power recovery


PC Health Monitoring

Voltage	+1.8V, +12V, +3.3V, +5V, +5V standby, 3.3V standby, 5+1 Phase-switching voltage regulator, Memory Voltages, Monitors for CPU Cores, VBAT
FAN	8x 4-pin fan headers (up to 8 fans), Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control
Temperature	Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, Thermal Monitor 2 (TM2) support, PECI, Support to monitor Supermicro AOC temperatures from IPMI or SD 5
LED	CPU / System Overheat LED, UID/Remote UID, Memory DIMM ECC error LEDs
Other Features	4x 8-pin GPU power connectors, Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC


Operating Environment

Operating Temperature Range	10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range	-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non-Operating Relative Humidity Range	5% - 95% (non-condensing)

VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£850 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by
purchasers in the EU (excluding UK) who are VAT registered

CS 225053 - 225101 -45 a rails + CBL-SAST-0654 dup

specifications

MPN:

CSE-819U X10DRU-i+ SAS815TQ

to request a price please fill out the form below...