Supermicro 2 Node Server CSE-808T-1200B 4x SIX-CORE X5650 24GB Ram 4x 3.5" Bays

Product Brand: Supermicro
Product Condition: Used
Excluding VAT: £427.50
Including VAT: £513.00
Information
Supermicro 2 Node Server CSE-808T-1200B 4x SIX-CORE X5650 24GB Ram 4x 3.5" Bays

Chassis Part number: CSE-808T-1200B

Motherboard Part number: X8DTT-F

Full Working Order, Tested

Includes:

  • 1 x Supermicro 2 Node Server CSE-808T-1200B
    • 2x Node Servers Each Consisting Of:
      • Processor - 2 x Intel Six-Core XEON X5650 2.66GHz Processors
      • Memory - 12GB Ram
      • Storage - 2 x 3.5" SATA Caddies
      • SATA RAID 0,1,5,10
    • 1 x 1200W Power Supply
    • 1 x Supermicro BPN-SAS-808 SAS/SATA Backplane

Manufacturers Chassis Full Spec:
CSE-808T-1200B
SuperChassis 808T-1200B (Black)
Form Factor
1U chassis - Supports 2 proprietary 16" x 6.5 " (40.6cm x 16.5cm) motherboards
Processor Support
Supports Twin motherboards with dual, single Intel® Xeon® / AMD Opteron™ processors
Dimensions
Height
1.7" (43mm)
Width
17.2" (437mm)
Depth
27.75" (705mm)
Gross Weight
39 lbs (17.7kg)
Available Colors
Black
Expansion Slots (per Node)
• 1x low-profile expansion slot (Riser Card Required)
Drive Bays (per Node)
Hot-swap
2x 3.5" SAS/SATA Hot-swap drive bays (supports SES2 drives)
SAS or enterprise SATA HDD only recommended
Backplane
1x 1U SAS/SATA backplane
System Cooling (per Node)
Fans
3x 4-pin PWM Cooling Fans

Manufacturer's Motherboard Full Spec
MBD-X8DTT-F-B
X8DTT-F
Physical Stats
Form Factor
Proprietary
Dimensions
16.64" x 6.5 " (42.26cm x 16.51cm)
Processor/Cache
CPU
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below:
Intel®
Xeon®Processor 5600 Series (Westmere)
Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
QPI
up to 6.4 GT/s
System Memory
Memory Capacity
12x 240-pin DIMM slots
Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
Memory Type
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB , 8GB** , 16GB**
Memory Voltage
1.5 V / 1.35 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset
Intel® 5500 (Tylersburg) chipset
ICH10R
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
Network Controllers
Intel® 82576 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Matrox G200eW
Super I/O
Winbond W83527HG chip
Clock Generator
932S421 chip
Input / Output
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2 rear + 1 header (2 Ports)
4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
1x VGA Port
Serial Port
1 Fast UART 16550 serial port
OS Compatibility
• Please see our OS Compatibility Chart
Chassis ( Optimized for X8DTT-F)
1U Chassis
CSE-808T-1200B
CSE-808T-780B
CSE-809T-1200B
CSE-809T-780B
2U Chassis
CSE-827H-R1200B
CSE-827H-R1400B
CSE-827T-R1400B
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
Expansion Slots
PCI-Express
1 (x16) PCI-E 2.0 slot
System BIOS
BIOS Type
32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
Management
Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI Power Management
Main Switch Override Mechansim
Power-on mode for AC power recovery
PC Health Monitoring
Voltage
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
CPU Core 6-Phase-switching voltage regulator
FAN
Total of four 4-pin PWM fans
4x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control (4-pin fan only)
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 4x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
Power Fail / Overheat LED
Suspend-state Indicator LED
UID LED
Other Features
SDDC Support
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered
Delivery is with UPS

CS See RJ -11

To request a price please fill out the form below...


Close