Supermicro 1U CSE-815 X9SCI-LN4F E3-1270v2 3.5GHz 16Gb Quad Gigabit 1U Server
Supermicro 1U CSE-815 X9SCI-LN4F E3-1270v2 3.5GHz 16Gb Quad Gigabit 1U Server
Supermicro 1U CSE-815 X9SCI-LN4F E3-1270v2 3.5GHz 16Gb Quad Gigabit 1U Server
Supermicro 1U CSE-815 X9SCI-LN4F E3-1270v2 3.5GHz 16Gb Quad Gigabit 1U Server
Supermicro 1U CSE-815 X9SCI-LN4F E3-1270v2 3.5GHz 16Gb Quad Gigabit 1U Server

Supermicro 1U CSE-815 X9SCI-LN4F E3-1270v2 3.5GHz 16Gb Quad Gigabit 1U Server

Product Brand: Supermicro
Product Condition: Used
Excluding VAT: £475.00
Including VAT: £570.00
Information
Image result for supermicro logo

Supermicro 1U CSE-815 X9SCI-LN4F E3-1270v2 3.5GHz 16Gb Quad Gigabit 1U Server

In good condition and in full working order, 12 months warranty

Supermicro CSE-815 1U 4 x 3.5" chassis

X9SCI-LN4F Motherboard

Intel XEON 4-core/8-thread E3-1270v2 3.5GHz CPU

16GB Ram

On-board IPMI

4 x 10/100/1000 Intel 82574L Ethernet LAN

SATA 2.0 3Gb/s and SATA 3.0 6Gb/s

4 x 3.5" Hard Drive Bays including hot plug caddies

hysical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 9.6", (30.48cm x 24.4 cm)
Processor/Cache
CPU
  • Intel® Xeon® processor E3-1200 v2
  • Socket H2 (LGA 1155)
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C204 PCH chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
    SATA 3.0 6Gb/s with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82574L, 4x Gigabit LAN ports
  • Virtual Machine Device Queues High efficient I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
  • BMC integrated Matrox G200
Super I/O
  • Nuvoton WPCM450RA0BX
Input / Output
Serial ATA
  • 6x SATA ports total (4x 3Gb, 2x 6Gb)
LAN
  • 4x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 8x USB 2.0 ports total
    (2x rear + 6x via header)
VGA
  • 1x VGA port
Serial Port / Header
  • 2x Fast UART 16550 serial port
    (one header and one rear port)
DOM
  • 1x DOM (Disk on Module) power connector
TPM
  • 1x TPM Header
Expansion Slots
PCI-Express
  • 1 (x16) PCI-E 3.0 slot***
  • 1 PCI 32-bit slot
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI (SMBIOS) 2.7
  • ACPI 4.0
  • PCI 2.3
  • USB Keyboard support
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI / ACPM Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery
  • Internal/External modem ring-on
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of 5 fan headers supporting up to 5 fans
  • Five 4-pin fan headers
  • 5x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • FC temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • +5V Standby alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered
DELIVERY WITH UPS

To request a price please fill out the form below...


Close