Riello Multi Sentry MSM 10 A0 10kVA 8000W 3 Phase 400V UPS System DMSMK10AA000
Riello Multi Sentry MSM 10 A0 10kVA 8000W 3 Phase 400V UPS System DMSMK10AA000
Riello Multi Sentry MSM 10 A0 10kVA 8000W 3 Phase 400V UPS System DMSMK10AA000
Riello Multi Sentry MSM 10 A0 10kVA 8000W 3 Phase 400V UPS System DMSMK10AA000
Riello Multi Sentry MSM 10 A0 10kVA 8000W 3 Phase 400V UPS System DMSMK10AA000

Riello Multi Sentry MSM 10 A0 10kVA 8000W 3 Phase 400V UPS System DMSMK10AA000

Product Brand: Riello Ups
Product Condition: Used
Excluding VAT: £1,900.00
Including VAT: £2,280.00
Information
Riello Multi Sentry MSM 10-A0 10kVA 8000W 3 Phase 400V UPS System DMSMK10AA000
In good condition and full working order
Included:-
1 x Riello Multi Sentry MSM 10-A0 10kVA 8000W 3 Phase 400V UPS System DMSMK10AA000
1 x NetMan 204 Network Card
The Multi Sentry 10kVA/8kW uninterruptible power supply from Critical Power Supplies is an on-line double-conversion UPS with a built-in battery pack designed to give 14 minutes runtime at full load.
The standard runtime can be extended using additional battery extension packs. The UPS has a single phase output and can be configured to run from a three or single phase input supply. Typical applications: Blade servers, comms rooms, server rooms and datacentres.
Multi Sentry has a very high operating efficiency (94%), high input power factor, advanced battery management and can work in one of several operating modes: On-line, Economy, Smart Active and Standby/Off, as well as operating as a frequency converter.
Features and Benefits.
Multi Sentry UPS have been designed for an easy install, especially on sites with limited power capacity available, a generator and harmonic compatibility problems. Typical features include:
- low input current distortion - less than 3%
- high input power factor 0.99
- power walk-in function to achieve progressive rectifier start-up
- delayed start-up on mains power supply return
The UPS also acts as a high performance filter to protect its supplies from load induced harmonics and reactive power.
Multi Sentry has a unique battery care system to optimise battery performance, extend working life and guarantee the UPS is fit to deliver its full-rated runtime when called upon to do so - in the event of a complete mains power failure. The UPS is designed to operate with a range of battery types: VRLA AGM and GEL lead-acid batteries including open-vented types, in addition to Ni-Cads.
Specific Battery Care features include:
- One-level recharge to meet the requirements of the most common VRLA AGM batteries.
- Two voltage level recharge meeting the IU characteristic.
- Restricted charging to reduce electrolyte consumption and extend the life of VRLA batteries.
- Temperature compensation: to avoid excessive voltage being applied to the batteries in a high ambient.
- Built-in battery testing to enable predicted failure reports and detect performance degradation.
- Deep battery discharge protection: to prevent over discharging the battery set.
- Low AC ripple current, achieved using a high-frequency battery charger.
- Wide input voltage range, with a rectifier that can work down to less than 40% of its nominal supply rating.
Multi Sentry can be used for a wide range of applications with several customisation options and accessories providing flexibility and a choice of performance levels:
- compatible with capacitive loads - without any reduction in active power (0.9 lead to 0.9 lag).
- multiple operating modes: On-Line, Eco, Smart-Active and Stand-By/Off and frequency conversion.
- PowerShare connections for priority-based load shedding on mains power supply failure.
- cold-start facility to allow the UPS to be switched on even without a mains power supply present.
- extended runtime options using battery extension cabinets.
- battery cabinet temperature sensor option to assist the temperature compensating charger.
- larger battery charger options to optimize recharge times.
- dual input supplies options for added resilience.
- isolation transformer options for Galvanic isolation and neutral connectivity
SKU MST15-T4
Power 15kVA/13.5kW
Runtime 18m at full load
Input Connection Hardwired terminals
Input Voltage 380/440/415Vac 3p+N, 50 or 60Hz (selectable)
Output Connection Hardwired terminals
Output Voltage 380/440/415Vac 3p+N, 50 or 60Hz (selectable)
Dimensions (WxDxH) 440x850x1320mm
Nett Weight 315Kg
Riello NetMan 204 Network Card
32bit RISC processor
Compatible with 10/100 Mbps Ethernet and IP v4/6 networks
Compatible with PowerShield³ and TeleNetGuard
SNMP v1, v2 and v3 with RFC1628 for PowerNetGuard and NMS connection
SNMP v1 with RFC3433 for the management of environmental sensors
HTTP and HTTPS for UPS control via web browser
SMTP for alarm notifications and UPS status updates via email
Modbus/TCP
BACnet/IP
Maximum expandability
WiFi ready, using a customized dongle can communicate via WiFi network
Events log and data management
Wake-on-LAN management for starting computers via TCP /IP network
Other standards: DHCP, DNS, FTP, NTP , ICMP , IGMP
Management of environmental sensors
Configurable via SSH sessions and HTTP
Firmware upgradeable via FTP and HTTP.

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered - International Delivery is with UPS


SL 219380- UPS

SL P11780 - Batteries

To request a price please fill out the form below...


Close