Dell Precision 7920 Workstation Tower CTO Configure-To-Order 4x 2.5/3.5" Bay

New Open Box (opened to verify contents)

Dell onsite Warranty Until December 11th, 2021

CTO - Configure-To-Order

No Memory, No CPU, No HDD included

Motherboard, Chassis, 2x Heatsinks & 1x PSU Are Included

We can supply any spec required, please click contact seller for a quote

Processor

• One or two Intel Xeon processor Scalable family CPUs with up to 28 cores per processor and Intel Advanced Vector Extensions, Intel Trusted Execution Technology, Intel AES New instructions, Optimized Intel Turbo Boost and optional Intel vPro™ technology

Operating System

• Windows 10 Pro (64 bit)
• Enterprise Linux® 7.3
• Ubuntu Linux 16.04
• NeoKylin 6.0 SP3 (China only)

Memory

• Six channel memory up to 1.5TB 2667MHz DDR4 ECC memory with dual CPUs, up to 3TB with select CPU SKUs
• 24 DIMM Slots (12 DIMMs per CPU). Note: memory speed is dependent on specific Intel® Xeon® Processor Scalable processor installed

Hard Drive

• Front accessible FlexBays support up to 4 x 2.5"/3.5" SATA HDD/SSDs and up to 8 drives with rear FlexBays populated with integrated Intel SATA controller.
• Up to 10 x 2.5"/3.5" SATA/SAS drives - requires the Broadcom MegaRAID 9460-16i controller.
• Up to 4 front accessible (hot plug) M.2 NVMe PCIe SSDs in FlexBays on enabled PCIe chassis with integrated Intel controller (>2 drives requires dual CPUs. NVMe RAID 0,1 option (Intel RSTe vROC).
• Dell M.2 carrier with PCIe SSD for PCIe FlexBay available as customer kit.
• Up to 8 x M.2 NVMe PCIe SSDs via 2 x Dell Ultra-Speed Drive Quad x16 cards (maximum requires dual CPUs), NVMe RAID 0,1,10 option on 1st card (Intel RSTe vROC).
• M.2 NVMe PCIe SSDs
• Up to 8* x 1TB drives on 2 Dell Precision Ultra-Speed Drive Quad x16 cards. *Requires dual CPU config.
• Front FlexBay M.2 NVMe PCIe SSDs
• Up to 4* x 1TB drives, 2 drives per CPU. *Requires dual CPU config.
• 2.5" SATA SSD
• Up to 10 x 1TB drives
• 2.5" SAS SSD
• Up to 10 x 800GB drives
• 3.5" SAS 7200 RPM 12Gb/s
• Up to 10 x 4TB
• 2.5" SAS 10K RPM 12Gb/s
• Up to 10 x 1.8TB
• 2.5" SAS 15K RPM 12Gb/sUp to 10 x 900GB 2.5" Self Encrypting Drives 512GB 2.5" SED (OPAL/ FIPS (140-2) HDD M.2 PCIe SED SSD 512GB and 1TB

Video Card

• Support for 4 PCI Express® x16 Gen 3 graphics cards, 1 - up to 750W with maximum of 3 x 250W double width graphics cards in 3 slots (dual CPU configuration) and up to 2 x 375W cards 220VAC input supply recommended for 750W configurations and some restrictions apply

High end 3D cards:

• Radeon™ Pro WX 9100
• Radeon™ Pro SSG (future)
• NVIDIA Quadro GP100
• NVIDIA Quadro P6000
• NVIDIA Quadro P5000

Mid-range 3D cards:

• Radeon™ Pro WX 7100
• Radeon™ Pro WX 5100
• Radeon™ Pro WX 4100
• NVIDIA Quadro P4000
• NVIDIA Quadro P2000

Entry 3D cards:

• Radeon™ Pro WX 3100
• Radeon™ Pro WX 2100
• NVIDIA Quadro P1000
• NVIDIA Quadro P600
• NVIDIA Quadro P400

Professional 2D cards:

• NVIDIA NVS 310

Dimensions

• Height: 433 mm (17.13") X Width: 218 mm (8.50") X Depth: 566 mm (21.46")
• Starting weight: 20.4kg (45.0 lb)

Security

• Trusted Platform Module (TPM 2.0); Optional CAC/PIV card reader for slimline bay, chassis Intrusion switch; Setup/BIOS Password; I/O Interface Security; Kensington® lock slot, Padlock ring, lockable power supply; Optional hard drive locking sleds (key lock), Dell Data Guardian, Dell Endpoint Security Suite Enterprise.

Ports

Front

• 2 USB 3.1 Type A
• 2 USB 3.1 Type C
• 1 Universal Audio Jack
• Up to 4 PCIe slots in PCIe enabled chassis for M.2 and U.2 (future) PCIe SSDs

Internal

• 1 USB 2.0
• 1 USB 2.0 header. (requires 3rd party splitter cable to support 2 x USB 2.0 Type A ports)
• 8 SATA @6Gb/s plus 1 SATA for optical

Rear

• 6 USB 3.1 Type A
• 1 Serial
• 2 RJ45 Network
• 2 PS2
• 1 Audio Line out
• 1 Audio Line in/Microphone

Slots

All slots PCIe Gen 3:

• 2 PCIe x16
• 2 Additional x16 slots with 2nd CPU
• 1 PCIe x8 open ended
• 1 x16 wired as x 4
• 1 x16 wired as x1

Chipset

• Intel C621 (Lewisburg)

Chassis

• Bays: (4) FlexBays and (1) 5.25" FlexBay supporting up to 10 x 3.5" or 2.5" drives (with MegaRAID 9460i-16 controller)
• (1) Slimline optical bay option adjacent to 5.25" bay; Available 2nd 5.25" bay - consumes/converts 2 FlexBays, (1) SD slot UHS ll Class 3 with read only support (SW enabled). Available PCIe chassis with PCIe FlexBays supporting M.2 NVMe PCIe SSDs and future U.2 NVMe PCIe SSDs. PCIe FlexBay customer kit available

We can supply this server with a different specification to suit your requirements; more or less memory, different or additional hard drives, additional network cards etc. Please contact us for a quote.

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK