Dell PowerVault MD1200 2U 12 bay 3.5" Storage Array with 2 x SAS 2 x PS Rails

Product Brand: Dell
Product Condition: Used
Excluding VAT: £551.00
Including VAT: £661.20
Dell PowerVault MD1200 2U 12 bay 3.5" Storage Array, 2xC, 2PS

In good conditionand full working order


  • 1 x Dell PowerVault MD1200 12-Bay SAS Storage Array Chassis
  • 2 x SAS Controllers
  • 2 x Power Supplies
  • The MD1200 can be used an expansion array for the MD3200/MD3200i, or can be connected directly to a server using a PERC H800/H810 controller
  • Rails

Dell™ PowerVault™ MD1200direct-attached storage enclosure offers versatility and high-capacitystorage for mainstream applications with optimal performance in sequential(streaming) applications.

· Seamless server and primary storage expansion for 6Gb/s SAS environments

· Supports mainstream and capacity-intensive applications such as email,backup to disk and video streaming

· Versatility for investment protection and data tiering


· Support for the followingconfigurations:
Unified mode (single path) for daisy chaining of up to 8 enclosures per PERCH800 (4 enclosures per port, single path)
Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERCH800 (4 enclosures connected to both ports via redundant path cabling)
Split mode with dual Enclosure Management Modules providing direct connectivityto drives 0 through 5 and a separate connectivity to drives 6 through 11.


· 2 Enclosure Management Modules(EMM) provide redundant enclosuremanagement capability

Back-Panel Connectors

· SAS connectors (per EMM)
1 SAS (SFF 8088) "IN" connector for connection to the host
1 SAS (SFF 8088) "OUT" connector for expansion to an additionalenclosure
Serial connector (per EMM)
1 6-pin UART mini-DIN connector (for factory use only)

LED Indicators

· Front panel
1 two-color LED indicator for system status
2 single-color LED indicators for power and split mode
Drive carrier
1 single-color activity LED
1 two-color LED status indicator per drive
3 two-color LED status indicators: one each for the two EMM SAS ports and onefor the EMM status
1 single-color Unit Identification LED for each EMM
Power supply/cooling fan module
3 LED status indicators for power supply status, power supply/fan fault and ACstatus


· Two fully redundant power supplies; supports DCpower
Wattage: AC - 600 W; DC - 700 W
Heat dissipation: AC - 2047BTU/hr; DC- 2388 BTU/hr
Voltage: 100-240 VAC, autosensing; 48V DC
Frequency: 50/60 Hz
Amperage: 8.6 A at 100 V, 4.3A at 240 V
Available Drive Power (per slot)
Supported drive power consumption (continuous):
up to 1.16 A at +5V
up to 1.6 A +12V


· Height
8.7cm (3.43 inches)
48.2cm (18.98 inches)
59.4 (23.39 inches)
28.39 kg (62.6 lb) (maximum configuration)
8.84 kg (19.5 lb) (empty)

Environmental Operating Conditions

· Temperature:
Operating: 10° to 35°C (50° to 95°F) withmaximum temp gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F)with temp gradation of 20°C per hour
Supports Fresh Air cooling, up to 35 degrees Celsius
Relative humidity:
Operating: 8% to 85% (non-condensing) withmaximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)
Operating: -16 to 3048 m (-50 to 10,000ft)
Storage: -16 to 10,600 m (-50 to 35,000ft)

Operating System

· Refer to RAID Card for details on supported Operating Systems:
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered

LA 851810x146gb 10k, 36713 10x146gb 10k, 36711 10x146gb 15k, 36712 10 x 146Gb 15k DUP x7

To request a price please fill out the form below...