Dell PowerVault MD1200 12 x 600GB SAS 15K Dual Controller Dual PSU

Product Brand: Dell PowerVault
Product Condition: Used
Excluding VAT: £1,900.00
Including VAT: £2,280.00

Dell PowerVault MD1200 12 x 600GB SAS 15K Dual Controller Dual PSU Warranty
In good condition and full working order

  • 1 x Dell PowerVault MD1200 12-Bay SAS Storage Array Chassis
  • 12 x 600GB SAS 15K Dell hot plug drives
  • 2 x Redundant Controllers
  • 2 x Power Supplies 0F884J
  • Rack Rails & Bezel
  • The MD1200 can be used an expansion array for the MD3200/MD3200i, or can be connected directly to a server using a PERC H800/H810 controller
Dell™ PowerVault™ MD1200 direct-attached storage enclosure offers versatility and high-capacity storage for mainstream applications with optimal performance in sequential (streaming) applications.

  • Seamless server and primary storage expansion for 6Gb/s SAS environments
  • Supports mainstream and capacity-intensive applications such as email, backup to disk and video streaming
  • Versatility for investment protection and data tiering

  • Support for the following configurations:

    Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H800 (4 enclosures per port, single path)

    Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H800 (4 enclosures connected to both ports via redundant path cabling)

    Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11.


  • 2 Enclosure Management Modules(EMM) provide redundant enclosure management capability

Back-Panel Connectors

  • SAS connectors (per EMM)

    1 SAS (SFF 8088) "IN" connector for connection to the host
    1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure

    Serial connector (per EMM)

    1 6-pin UART mini-DIN connector (for factory use only)

LED Indicators

  • Front panel

    1 two-color LED indicator for system status
    2 single-color LED indicators for power and split mode

    Drive carrier

    1 single-color activity LED
    1 two-color LED status indicator per drive


    3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status
    1 single-color Unit Identification LED for each EMM

    Power supply/cooling fan module

    3 LED status indicators for power supply status, power supply/fan fault and AC status


  • Two fully redundant power supplies; supports DC power

    Wattage: AC - 600 W; DC – 700 W

    Heat dissipation: AC - 2047BTU/hr; DC - 2388 BTU/hr

    Voltage: 100-240 VAC, auto sensing; 48V DC

    Frequency: 50/60 Hz

    Amperage: 8.6 A at 100 V, 4.3 A at 240 V

    Available Drive Power (per slot)
    Supported drive power consumption (continuous):
    up to 1.16 A at +5V
    up to 1.6 A +12V


  • Height 

    8.7cm (3.43 inches)


    48.2cm (18.98 inches)


    59.4 (23.39 inches)


    28.39 kg (62.6 lb) (maximum configuration)
    8.84 kg (19.5 lb) (empty)

Environmental Operating Conditions

  • Temperature:

    Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
    Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour
    Supports Fresh Air cooling, up to 35 degrees Celsius

    Relative humidity:

    Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
    Storage: 5% to 95% (non-condensing)


    Operating: -16 to 3048 m (-50 to 10,000 ft)
    Storage: -16 to 10,600 m (-50 to 35,000 ft)

Operating System

  • Refer to RAID Card for details on supported Operating Systems:
    PERC H800
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered
Any Questions? Please call 020 8882 1111 from UK or +44 208882 1111 from outside the UK

To request a price please fill out the form below...