Dell PowerVault MD1200 10x 600GB 2x 146GB SAS HDD 2x MD12 Controller 2x 600W PSU

MPN: MD1200
Product Brand: Dell
Product Condition: Used
Excluding VAT: £1,710.00
Including VAT: £2,052.00
Information
Dell PowerVault MD1200 10x 600GB 2x 146GB SAS HDD 2x MD12 Controller 2x 600W PSU

In Good Condition, Full Working Order

Tested

Includes Rails & Bezel

Included

  • 1 x Dell PowerVault MD1200 With:
    • 2 x 600W PSU DP/N: NFCG1
    • 2 x MD12 Series 6Gb/s SAS Controllers DP/N: W307K
    • 10 x 600GB 15K 3.5" SAS Drives DP/N: W347K
    • 2 x 146GB 15K 3.5" SAS Drives DP/N: 1DKVF
    • Rails & Bezel

Description:
Dell PowerVault MD1200 is the second generation of Dell's low-cost, high-capacity expansion enclosure that improves density, versatility and performance over previous generation to enhance support for mainstream and capacity-intensive applications.

The PowerVault MD1200 offers seamless expansion for Dell PowerEdge servers with the PERC H810 Host-RAID adapter. It also offers drive flexibility when adding capacity or data tiering to any of Dell's primary storage arrays.

Easily Expand Your Server Capacity: The PowerVault MD1200 is engineered to seamlessly expand the capacity of Dell PowerEdge servers and PowerVault MD3 storage series.This expansion enclosure can support twelve, 3.5- or 2.5-inch SAS hard-disk drives (HDDs) or solid-state drives (SSDs)* in a 2U array and expands up to 8 arrays behind a single PERC H810 Host-RAID adapter.

Versatility and Flexibility to Meet Most Business Needs: The MD1200 is Dell's most versatile direct-attached storage expansion enclosure. Featuring support for 2.5 inch drives, as well as the ability to mix 2.5-inch* and 3.5-inch enclosures behind a single PERC H810 Host-RAID adapter,the PowerVault MD1200 delivers capacity and performance to support most customer deployments.
Connectivity
  • Support for the following configurations:
    • Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H800 (4 enclosures per port, single path)
    • Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H800 (4 enclosures connected to both ports via redundant path cabling)
    • Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11.
Management
  • 2 Enclosure Management Modules(EMM) provide redundant enclosure management capability
Back-Panel Connectors
  • SAS connectors (per EMM)
    • 1 SAS (SFF 8088) "IN" connector for connection to the host
    • 1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure
Serial connector (per EMM)
  • 1 6-pin UART mini-DIN connector (for factory use only)
LED Indicators
  • Front panel
    • 1 two-color LED indicator for system status
    • 2 single-color LED indicators for power and split mode
  • Drive carrier
    • 1 single-color activity LED
    • 1 two-color LED status indicator per drive
  • EMM
    • 3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status
    • 1 single-color Unit Identification LED for each EMM
  • Power supply/cooling fan module
    • 3 LED status indicators for power supply status, power supply/fan fault and AC status
Power
  • Two fully redundant power supplies; supports DC power
  • Wattage: AC - 600 W; DC - 700 W
  • Heat dissipation: AC - 2047BTU/hr; DC - 2388 BTU/hr
  • Voltage: 100-240 VAC, auto sensing; 48V DC
  • Frequency: 50/60 Hz
  • Amperage: 8.6 A at 100 V, 4.3 A at 240 V
  • Available Drive Power (per slot)
    • Supported drive power consumption (continuous):
    • up to 1.16 A at +5V
    • up to 1.6 A +12V
Chassis
  • Height: 8.7cm (3.43 inches)
  • Width: 48.2cm (18.98 inches)
  • Depth: 59.4 (23.39 inches)
  • Weight:
    • 28.39 kg (62.6 lb) (maximum configuration)
    • 8.84 kg (19.5 lb) (empty)
Environmental Operating Conditions
Temperature:
  • Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
  • Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour.
  • Supports Fresh Air cooling, up to 35 degrees Celsius
Relative humidity:
  • Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
  • Storage: 5% to 95% (non-condensing)
Altitude:
  • Operating: -16 to 3048 m (-50 to 10,000 ft)
  • Storage: -16 to 10,600 m (-50 to 35,000 ft)
Operating System
  • Refer to RAID Card for details on supported Operating Systems:
    • PERC H800
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered
DELIVERY IS WITH UPS
CS 208561 w/rails drives dup
Specifications
  • MPN:
    MD1200

To request a price please fill out the form below...


Close