Dell Compellent SC420 Expansion Enclosure 24x 2.5" SAS Drive Bays 2x EMM 2x PSU

Product Brand: Dell
Product Condition: Refurbished
Excluding VAT: £1,425.00
Including VAT: £1,710.00
Information
Dell Compellent SC420 Expansion Enclosure 24x 2.5" SAS Drive Bays 2x EMM 2x PSU
Model No: Compellent SC420
In Good Condition, Full Working Order
Tested
2 Years Warranty
Included
  • 1 x Dell Compellent SC420 Expansion Enclosure 24-Bay
    • 2 x 12G-SAS-4 SAS 12Gbps Redundant Controllers (4 x SFF-8644 IN/OUT Per Controller)
    • x24 way backplane for up to 24 x 2.5" SAS or SAS SSD hard drives
    • Dual Redundant 600W Power Supplies
    • Rails Included
    • Bezel Included
Specification:
SUPPORTED CONTROLLERS
SC9000, SC8000*, SC7020, SC5020, SC4020*
* Note this 12Gb SAS enclosure supports the legacy SC8000 and SC4020 arrays, but will run at 6Gb speed.
CONTROLLER ENCLOSURE CONNECTION (DUAL MODULES)
12Gb SAS
DRIVE SLOT SIZE
2.5"
MAX DRIVES PER ENCLOSURE
24
MAX RAW CAPACITY PER ENCLOSURE
368.64TB
FORM FACTOR
2U
INTERMIXED DRIVE TYPE SUPPORT
Yes
SAS DRIVE SUPPORT 2.5" HDD
  • 600GB, 15K
  • 600GB, 15K SED
  • 1.2TB, 10K
  • 900GB, 15K SED
  • 900GB, 15K
  • 900GB, 10K
  • 1TB, 7.2K
  • 1.8TB, 10K
  • 1.8TB, 10K SED
2.5" Write-intensive SSD
  • 800GB
  • 1.6TB
  • 1.6TB SED
2.5" Read-intensive SSD
  • 960GB
  • 1.92TB
  • 1.92TB SED
  • 3.84TB
  • 7.68TB
  • 15.36TB
CHASSIS
HEIGHT X WIDTH X DEPTH
8.7 cm (3.43 in) x 48.2cm (18.98 in) x 54.1cm (21.30 in)
WEIGHT AT MAXIMUM CONFIGURATION
24.2 kg (53.35 lb)
WEIGHT AT EMPTY
8.8kg (19.4 lb)
RACK SUPPORT
ReadyRails II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting
POWER
POWER/WATTAGE
Two 600W hot-swappable, redundant power supplies; 450W maximum draw
HEAT DISSIPATION
2,047 BTU/hr (at 600W)
1,621 BTU/hr
VOLTAGE
100-240 VAC, auto sensing
FREQUENCY
50/60 Hz
AMPERAGE
8.6 A at 100 V, 4.3 A at 240 V
Maximum power draw: 74 amps
ENVIRONMENTAL OPERATING CONDITIONS
OPERATING TEMPERATURE
SC420: 10° to 35°C (50° to 95) with a maximum temperature gradation of 10°C per hour For altitudes above 2950 ft (900 m), the maximum operating temperature is derated 1°F per 550 ft (168 m).
NON-OPERATING TEMPERATURE
-40 to 65°C (-40 to 149°F) with a maximum temperature gradation of 20°C per hour
OPERATING HUMIDITY
8% to 85% (noncondensing) with a maximum humidity gradation of 10% per hour 20 to 80%
NON-OPERATING HUMIDITY (NONCONDENSING)
5% to 95% (non-condensing) 10 to 90%
OPERATING ALTITUDE
-16 to 3048 m (-50 to 10,000 ft)
NON-OPERATING ALTITUDE
-16 to 10,600 m (-50 to 35,000 ft)
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by
purchasers in the EU (excluding UK) who are VAT registered
CS 224751 224752 224753 224754 224755 224756 224757 224758 224759 -9 dup

To request a price please fill out the form below...


Close