Cisco DS-CAC-6000W Uninterruptable Power Supply DPST-6000BB For 6500 Series
Cisco DS-CAC-6000W Uninterruptable Power Supply DPST-6000BB For 6500 Series
Cisco DS-CAC-6000W Uninterruptable Power Supply DPST-6000BB For 6500 Series
Cisco DS-CAC-6000W Uninterruptable Power Supply DPST-6000BB For 6500 Series
Cisco DS-CAC-6000W Uninterruptable Power Supply DPST-6000BB For 6500 Series

Cisco DS-CAC-6000W Uninterruptable Power Supply DPST-6000BB For 6500 Series

Product Brand: Cisco
Product Condition: Used
Excluding VAT: £171.00
Including VAT: £205.20
Information
Cisco DS-CAC-6000W Uninterruptable Power Supply DPST-6000BB
For 6500 Series
P/N: DS-CAC-6000W
P/N: DPST-6000BB
In Good Condition
In Working Order
Included
  • 1 x Cisco DS-CAC-6000W Uninterruptable Power Supply DPST-6000BB For 6500 Series
PRODUCT OVERVIEW
The 6000-watt (W) power supply for the Cisco Catalyst 6500 Series chassis (Figure 1) is a dual AC input power supply. When both inputs are at high line (220 VAC nominal voltage) then the output is 6000W. When both inputs are active but at least one is operating at low line (110 VAC nominal voltage), or a single input is active and running from a high line (220 VAC nominal voltage) source, the unit is capable of providing 2900W output power. (The power supply will not power up with 110V single input.)
All Cisco Catalyst 6500 Series chassis hold up to two load-sharing, fault-tolerant, hot-swappable power supplies. Only one supply is required to operate a fully loaded chassis. If a second supply is installed, it operates in a load-sharing capacity. The power supplies are hot-swappable-a failed power supply can be removed without powering off the system.
Specification
  • Input-voltage range and frequency:100-240 VAC, 47-63 Hz
  • Input current (each input): 16A
  • Fan Tray Required: High-speed fan
  • Output holdup time: 20 ms minimum
  • Power cord rating: 16A
  • Power-supply input receptacles: IEC 320-C19
Input-frequency range output power
  • 6000W if both inputs are 220 VAC
  • 2900W if both inputs are active but at least 1 is at 110 VAC or a single input is active and at 220 VAC
Chassis Compatibility
  • Cisco Catalyst 6506
  • Catalyst 6506-E
  • Catalyst 6509
  • Catalyst 6509-E
  • Catalyst 6509-NEB
  • Catalyst 6509-NEB-A
  • Catalyst 6513
  • Cisco OSR-7609
  • 7609
  • 7613 chassis
Software Compatibility
Cisco IOS Software Release
  • 12.2(18)SXD and later
  • 12.1E: not supported
Cisco Catalyst OS
  • 8.4(1)
Physical Specifications
  • Dimension: (H x W x D): 7 x 8 x 13.5 (in.)
  • Weight: 29 lb (13 kg)
BTU
  • 24,000 BTUs per hour (at 6 kW)
  • 11,600 BTUs per hour (at 2.9 kW)
Environmental Conditions
  • Operating temperature: 32 to 104°F (0 to 40°C)
  • Storage temperature: -40 to 158 °F (-40C to 70°C)
  • Relative humidity operating, non condensing: 10% to 95%
  • Relative humidity nonoperating, noncondensing: 10% to 95%
  • MTBF: calculated 150,000 hr (MIL-217 and Bellcore TR-NWT-000332), demonstrated 300,000 hr
EMI and EMC Compliance
  • FCC Part 15 (CFR 47) Class A
  • ICES-003 Class A
  • EN 55022 Class A
  • CISPR 22 Class A
  • AS/NZS 3548 Class A
  • VCCI Class A
  • EN 55024
  • EN300 386
  • EN 50082-1
  • EN 61000-3-2
  • EN 61000-3-3
  • EN 61000-6-1
Safety Compliance
  • UL 60950
  • CAN/CSA-C22.2 NO. 60950
  • EN 60950
  • IEC 60950
LED Indicators
  • 2 green "INPUT OK," illuminate when input voltage is 85 VAC or greater
  • 1 green "FAN OK," illuminates when the power supply fan is operating
  • 1 red "OUTPUT FAIL," normally is off but illuminates when power supply outputs are out of regulation limits
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by
purchasers in the EU (excluding UK) who are VAT registered
TH 187766 - DCH1229X02D
TH 187767 - DCH1229X01M

To request a price please fill out the form below...


Close