- 1 x Cisco CISCO2811 Integrated Services Router 1U Security Appliance
- DRAM
- Default: 256 MB
- Maximum: 768 MB
- Compact Flash
- Default: 64 MB
- Maximum: 256 MB
- Fixed USB 1.1 Ports: 2
- Onboard LAN Ports: 2-10/100
- Onboard AIM (Internal) Slot: 2
- Interface Card Slots: 4 slots, each slot can support HWIC, WIC, VIC, or VWIC type modules
- Network-Module Slot: 1 slot, supports NM and NME type modules
- Extension Voice Module Slot: 0
- PVDM (DSP) Slots on Motherboard: 2
- Integrated Hardware-Based Encryption: Yes
- VPN Hardware Acceleration (on Motherboard): DES, 3DES, AES 128, AES 192, and AES 256
- Optional Integrated In-Line Power (PoE): Yes, requires AC-IP power supply
- Console Port (up to 115.2 kbps): 1
- Auxiliary Port (up to 115.2 kbps): 1
- Minimum Cisco IOS Software Release: 12.3(8)T
- Rack Mountable: Yes, 19- and 23-in. options
- Wall Mountable: Yes
- AC Input Voltage: 100 to 240 VAC, autoranging
- AC Input Frequency: 47-63 Hz
- AC Input Current: 2A (110V) 1A (230V)
- AC Input Surge Current: 50A maximum, one cycle
- AC-IP Maximum In-Line Power Distribution: 160W
- AC-IP Input Current: 4A (110V) 2A (230V)
- AC-IP Input Surge Current: 50A maximum, one cycle
- DC Input Voltage: 24 to 60 VDC, autoranging positive or negative
- DC Input Current
- 8A (24V)
- 3A (60V)
- Startup current 50A<10 ms
- Typical Power Dissipation (No Modules): 32W (109 BTU/hr)
- Power Dissipation-AC without IP Phone Support: 170W (580 BTU/hr)
- Power Dissipation-AC with IP Phone Support-System Only: 210W (717 BTU/hr)
- Power Dissipation-AC with IP Phone Support-IP Phones: 160W (546 BTU/hr)
- Power Dissipation-DC: 180W (614 BTU/hr)
- RPS: External only, connector for RPS provided by default
- Recommended RPS Unit: Cisco RPS-2300 Redundant Power System
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Non-Operating Temperature: -40° to 158°F (-40° to 70°C)
- Maximum Operating Temperature at Altitude
- 40°C @ sea level
- 40°C @ 6,000 ft (1800 m)
- 30°C @ 13,000 ft (4000 m)
- 27.2°C @ 15,000 ft (4600 m)
- Operating Humidity: 5 to 85%RH, non-condensing
- Dimensions (H x W x D)
- 1.75 x 17.25 x 16.4 in.
- (44.5 x 438.2 x 416.6 mm)
- Rack Height: 1 rack unit (1RU)
- Weight (Fully Configured): 14 lb (6.4 kg)
- Noise Level (Min/Max)
- 47 dBA for normal operating temperature (<90°F/32.2°C)
- 57 dBA (@ maximum fan speed
Router#show version
Cisco IOS Software, 2800 Software(C2800NM-ADVIPSERVICESK9-M), Version 12.4(17), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 07-Sep-07 16:45 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASESOFTWARE (fc1)
Router uptime is 1 minute
System returned to ROM by power-on
System image file is"flash:c2800nm-advipservicesk9-mz.124-17.bin"
This product contains cryptographic features and issubject to United
States and local country laws governing import, export,transfer and
use. Delivery of Cisco cryptographic products does notimply
third-party authority to import, export, distribute oruse encryption.
Importers, exporters, distributors and users areresponsible for
compliance with U.S. and local country laws. By usingthis product you
agree to comply with applicable laws and regulations. Ifyou are unable
to comply with U.S. and local laws, return this productimmediately.
A summary of U.S. laws governing Cisco cryptographic productsmay be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us bysending email to
export@cisco.com.
Cisco 2811 (revision 53.50) with 249856K/12288K bytes ofmemory.
Processor board ID FCZ111672AL
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Router#show inverntory
^
% Invalid input detected at '^' marker.
Router#show hardware
Cisco IOS Software, 2800 Software(C2800NM-ADVIPSERVICESK9-M), Version 12.4(17), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 07-Sep-07 16:45 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASESOFTWARE (fc1)
Router uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-advipservicesk9-mz.124-17.bin"
This product contains cryptographic features and issubject to United
States and local country laws governing import, export,transfer and
use. Delivery of Cisco cryptographic products does notimply
third-party authority to import, export, distribute oruse encryption.
Importers, exporters, distributors and users areresponsible for
compliance with U.S. and local country laws. By usingthis product you
agree to comply with applicable laws and regulations. If youare unable
to comply with U.S. and local laws, return this productimmediately.
A summary of U.S. laws governing Cisco cryptographicproducts may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us bysending email to
export@cisco.com.
Cisco 2811 (revision 53.51) with 249856K/12288K bytes ofmemory.
Processor board ID FCZ111672AL
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Router#
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND
by purchasers in the EU (excluding UK) who are VAT registered
-
MPN:CISCO2811
to request a price please fill out the form below...
close