Brocade Silkworm 200E Fibre Channel Switch 1U Rackmount P/n SM210E-0000

MPN: SM210E-0000
Product Brand: Brocade
Product Condition: Used
Excluding VAT: £156.75
Including VAT: £188.10

Brocade Silkworm 200E Fibre Channel Switch 1U Rackmount

P/n SM210E-0000

In good condition and full working order

8 x active ports and 8 x SFP's included


  • 1 x Brocade Silkworm 200E Fibre Channel Switch 1U Rackmount P/n SM210E-0000
  • 1 x Kettle Power Supply Cord

Height 1.69 in. (4.29 cm)
Width 16.87 in. (42.85 cm)
Depth 12.10 in. (30.734 cm)
Weight 8.8 lbs (4.0 kg)

Memory Type Installed Memory
Main memory (SDRAM) 128 MB
Compact flash 256 MB

Specification Description
Autoconfiguring port types F_Port, FL_Port, and E_Port
System architecture Nonblocking shared-memory switch
System processor PPC440GP, 333 MHz
SDRAM 128 MB DDR SDRAM onboard memory operating at 133 MHz
Compact flash 256 MB module
ANSI Fibre Channel protocol FC-PH (Fibre Channel Physical and Signaling Interface standard)
Modes of operation Fibre Channel Class 2, Class 3, Class F
Fabric initialization Complies with FC-SW-2 6.6
Ethernet port One 10/100 Mbit/sec Ethernet port; accessed through RJ45
Terminal port One UART interface for terminal, accessed through DB9 connector
ASIC Goldeneye ASIC for Fibre Channel Switching
Port Status LEDs 16 LEDs (green/amber) to indicate status for each port
Link Speed LEDs 16 LEDs (green/amber) to indicate link speed for each port
System Power LED One LED (green) to indicate system power
System Status LED One LED (green/amber) to indicate system status
Ethernet LEDs Two Ethernet LEDs to indicate speed and link status
Power supply One fixed power supply (not a FRU)
Fans Three fixed fans operating at dual speeds (not a FRU). RPM data
are not available for these fans.
FC-IP (IP over Fibre Channel) Complies with FC-IP 2.3 of FCA profile
Aggregate switch I/O
128 Gbit/sec if all 16 ports running at 4 Gbit/sec, full duplex
Port-to-port latency Less than 2 microseconds with no contention (destination port is
EMC (electromagnetic
An operating SilkWorm 200E conforms to the emissions
requirements specified by the following regulations:
• FCC Rules & Regulations, Part 15 subpart B, Class A
• CSA C108.8 Class A
• VCCI Class A ITE
• CISPR 22 Class A
• EN55022 Class A
• Korean EMC Requirements
• BSMI Standard CNS 13438
• EMC Directive 89/336/EEC
• EN50082-2/EN55024: 1998
• ICES-003 Class A
• IEC 61000-4-2 Severity Level 3 for Electrostatic
• IEC 61000-4-3 Severity Level 3 for Radiated Fields
• IEC 61000-4-4 Severity Level 3 for Fast Transients
• IEC 61000-4-5 Severity Level 3 for Surge Voltage
• IEC 61000-4-6 Conducted Emissions
• IEC 61000-4-11 Voltage Variations
• EN 61000-4-12 Oscillatory Waves Immunity
• EN 61000-3-2 Limits for Harmonic Current Emissions
• EN 61000-3-3 JEIDA


VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered
Any questions?
Please call freephone 0800 328 4995 or from outside the UK +44 7725 301 888

PE 70632, 70633, 70634, P8459 R6

  • MPN:

To request a price please fill out the form below...