Audio Technica AT871UG Unidirectional Condenser Boundary Powered Microphone

Product Brand: Audio Technica
Product Condition: Used
Excluding VAT: £23.75
Including VAT: £28.50
Information

Audio Technica AT871UG Unidirectional Condenser Boundary Powered Microphone

Model Number: AT871UG

In good condition and in full working order

Includes

  • 1 x Audio Technica AT871UG Unidirectional Condenser Boundary Powered Microphone
More Info:

Unidirectional Condenser Boundary Microphone

AT871UG

  • Designed for surface-mount applications such as high-quality sound reinforcement, professionalrecording, television, conferencing and other demanding sound pickup situations.
  • UniGuardTM RFI-shielding technology offers outstanding rejection of radio frequencyinterference(RFI).
  • Superior off-axis rejection for maximum gain before feedback.
  • Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance.
  • Heavy die-cast case and non-silp silicon foam bottom pads minimize coupling of surface vibration to the microphone.
  • Low-profile design with low-reflectance finish for minimum visibility.
  • AT871UG has contained electronics eliminate need for external power module.
  • The AT871UG requires 9V to 52V phantom power for operation only.

AT871UG Specifications

Element
Fixed-charge back plate, permanently polarized condenser
Polar Pattern
Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response
30 ~ 20,000 Hz
Open Circuit Sensitivity
-34 dB(19.9mV) re 1V at 1Pa
Impedance
200 Ω
Maximum Input Sound Level
133 dB SPL (1KHz,THD 1%)
Dynamic Range (Typical)
103 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio
67 dB, 1 kHz at 1Pa
Phantom Power Requirements
415 g
Dimensions
17.0mm x 145.0mm x 120.0mm (H x W x D)
Angle
120°
Cable
7.6 m long, 3.2 mm diameter, 2-conductor shielded cable with TA3F-type connector and XLRM-type connectors.
Accessories Furnished
Soft protective pouch
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK

AJ 95137 -1

To request a price please fill out the form below...


Close