APC Parallel Maintenance Bypass Panel, up to 3 units 30-40kVA, 400V Wallmount

Product Brand: APC
Product Condition: Used
Excluding VAT: £665.00
Including VAT: £798.00
Information
APC Parallel Maintenance Bypass Panel, up to 3 units
30-40kVA, 400V Wallmount
P/N: SBPAR30K40H-WP
In Good Condition
In Full Working Order
Included
  • 1 x APC Parallel Maintenance Bypass Panel, up to 3 units 30-40kVA, 400V Wallmount

Sustainability

  • EU CoC for UPS - Ensures that UPSs sold in the EU are highly efficient

Protection

  • Frequency and voltage regulation - Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Cold-start capable - Provides temporary battery power when the utility power is out.
  • Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Marketing Features

  • Manual maintenance bypass - Reduces installation costs by eliminating the need for an external mechanical bypass.
  • Network manageable - Provides remote power management of the UPS over the network.
  • Scalable runtime - Allows additional run time to be quickly added as needed.
  • Dual mains input - Increases availability by allowing the UPS to be connected to two separate power sources.
  • Input power factor correction - Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Serviceability

  • Modular design - Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
  • Shippable with modules installed - Enables pre-installation UPS staging and testing and faster installation.
  • Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery replacement without tools - Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Availability

  • Automatic internal bypass - Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Dual mains input - Increases availability by allowing the UPS to be connected to two separate power sources.
  • Scalable runtime - Allows additional run time to be quickly added as needed.
  • Generator compatible - Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Battery modules connected in parallel - Delivers higher availability through redundant batteries.

Total Cost of Ownership

  • Input power factor correction - Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Manual maintenance bypass - Reduces installation costs by eliminating the need for an external mechanical bypass.
  • Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.

Manageability

  • SmartSlot - Customize UPS capabilities with management cards.
  • InfraStruXure Manager Compatible - Enables centralized management via the APC InfraStruXure Manager.
  • LCD display - Alpha-Numeric Display which displays system parameters and alarms.
  • Network manageable - Provides remote power management of the UPS over the network.
  • Audible alarms - Provides notification of changing utility power and UPS power conditions
  • Programmable frequency - Ensures compatibility with different input frequencies.
  • LED status indicators - Quickly understand unit and power status with visual indicators.
Specification
General
  • Device Type: Bypass switch - external
Power Device
  • Input Voltage AC 400 V
  • Input Wiring 3-phase
  • Frequency Required 50 Hz
  • Input Connectors 3
  • Power Output Connectors Details 1 x hardwire 5-wire (3PH + N + G)
  • Max Spike Current 182.4 A
Miscellaneous
  • Features Wall mountable
  • Compliant Standards EN 50091-2, IEC 62040-3, IEC 62040-1-1
Dimensions & Weight
  • Width 56 cm
  • Depth 21.6 cm
  • Height 117 cm
Compatibility Information
  • Designed For APC Smart-UPS VT 30kVA, 30kVA with 3 Battery Modules Expandable to 4, 30kVA with 3 Battery Modules Expandable to 5, 30kVA with 4 Battery Modules, 30kVA with 4 Battery Modules Expandable to 5, 30kVA with 5 Battery Modules, 40kVA, 40kVA with 4 Battery Modules

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND
by purchasers in the EU (excluding UK) who are VAT registered
TH 219553 219554

To request a price please fill out the form below...


Close