APC AP8981 Zero U 16 Amp 11kW  230V 21x C13 3x C19 PDU Power Distribution Unit
APC AP8981 Zero U 16 Amp 11kW  230V 21x C13 3x C19 PDU Power Distribution Unit
APC AP8981 Zero U 16 Amp 11kW  230V 21x C13 3x C19 PDU Power Distribution Unit
APC AP8981 Zero U 16 Amp 11kW  230V 21x C13 3x C19 PDU Power Distribution Unit
APC AP8981 Zero U 16 Amp 11kW  230V 21x C13 3x C19 PDU Power Distribution Unit

APC AP8981 Zero U 16 Amp 11kW 230V 21x C13 3x C19 PDU Power Distribution Unit

Product Brand: APC
Product Condition: Used
Excluding VAT: £228.00
Including VAT: £273.60
Information
APC AP8981 Zero U 16 Amp 11kW 230V 21x C13 3x C19 PDU Power Distribution Unit
Full Working Order
Tested
PC Rack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19
Features:

1 User Interface display for local access
2. Environmental monitoring port for external temperature/humidity probe
3. Local USB port for flash firmware updates and downloading data/event logs (not to be used as serial port)
4. CAN In/Out ports for network port sharing
5. 21 x IEC320 C13 & 3 x IEC320 C19 Outlets
6. 1.8 metre power cord terminates with an IEC309 16A 5 pin input connector.

Rack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Output

Nominal Output Voltage
208V, 230V
Overload Protection
No
Maximum Total Current Draw
16
Output Connections
(21) IEC 320 C13 (Battery Backup)
(3) IEC 320 C19 (Battery Backup)

Input

Nominal Input Voltage
400V 3PH
Input frequency
50/60 Hz
Input Connections
IEC 309 16A 3P+N+PE, IEC 309 20A 3P+N+E
Cord Length
1.83meters
Number of Power Cords
1
Load Capacity
11000VA
Maximum Input Current
16A
Maximum Line Current
16A
Regulatory Derated Input Current (North America)
16A

Physical

Maximum Height
1791MM, 179.1CM
Maximum Width
56MM, 5.6CM
Maximum Depth
46MM, 4.6CM
Net Weight
7.0KG
Shipping weight
8.95KG
Shipping Height
2002MM, 200.2CM
Shipping Width
165MM, 16.5CM
Shipping Depth
114MM, 11.4CM
Color
Black
Units per Pallet
48.0

Environmental

Operating Temperature
-5 - 45 °C
Operating Relative Humidity
5 - 95 %
Operating Elevation
0-3000meters
Storage Temperature
-25 - 65 °C
Storage Relative Humidity
5 - 95 %
Storage Elevation
0-15000meters

Conformance

Approvals
cUL Listed, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Class A, ICES-003, UL Listed, VDE
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK)who are VAT registered
DELIVERY IS WITH UPS
SL 213241
SL 213242
SL 213243
SL 213244

To request a price please fill out the form below...


Close