APC AP8959 Smart Switched Rack Power Strip PDU 2G, ZeroU 16A 230V 21x C13 3x C19
APC AP8959 Smart Switched Rack Power Strip PDU 2G, ZeroU 16A 230V 21x C13 3x C19
APC AP8959 Smart Switched Rack Power Strip PDU 2G, ZeroU 16A 230V 21x C13 3x C19
APC AP8959 Smart Switched Rack Power Strip PDU 2G, ZeroU 16A 230V 21x C13 3x C19
APC AP8959 Smart Switched Rack Power Strip PDU 2G, ZeroU 16A 230V 21x C13 3x C19

APC AP8959 Smart Switched Rack Power Strip PDU 2G, ZeroU 16A 230V 21x C13 3x C19

Product Brand: APC
Product Condition: Used
Excluding VAT: £330.00
Including VAT: £396.00
Information
APC AP8959 Smart Switched Rack Power Strip PDU 2G, ZeroU 16A 230V 21x C13 3x C19
In Full Working Order
TESTED And Rest To Factory Default
Rack PDU 2G, Switched, ZeroU, 16A, 100-240V, (21) C13 & (3) C19
Included:-
1 x APC AP8959 Smart Switched Rack Power Strip PDU 2G, ZeroU 16A 230V 21x C13 3x C19
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Network Management Capabilities
Remote Individual Outlet Control
Alarm Thresholds
Local Current Monitoring Display
Power Delays
Load indicator LED
Flash Upgradeable
Integrates with StruxureWare Data Center Expert
Device Type - Power distribution strip - rack-mountable
Input Voltage - AC 200/208/230 V
Output Voltage - AC 200/208/230 V
Output Connector(s) - 3 x power IEC 320 EN 60320 C19 21 x power IEC 320 EN 60320 C13
Networking - RS-232
Remote Management Protocol - SNMP, Telnet, HTTP
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE
European Union (EU) AND by
purchasers in the EU (excluding UK) who are VAT registered
SL 186955
SL 186956

To request a price please fill out the form below...


Close