APC AP8886 2G Metered Rack PDU 32A 230V C13 C19 Power Distribution Unit ZeroU
APC AP8886 2G Metered Rack PDU 32A 230V C13 C19 Power Distribution Unit ZeroU
APC AP8886 2G Metered Rack PDU 32A 230V C13 C19 Power Distribution Unit ZeroU
APC AP8886 2G Metered Rack PDU 32A 230V C13 C19 Power Distribution Unit ZeroU
APC AP8886 2G Metered Rack PDU 32A 230V C13 C19 Power Distribution Unit ZeroU

APC AP8886 2G Metered Rack PDU 32A 230V C13 C19 Power Distribution Unit ZeroU

Product Brand: APC
Excluding VAT: £700.63
Including VAT: £840.76
Information
APC AP8886 2G Metered Rack PDU 32A 230V C13 C19 Power
Distribution Unit ZeroU
P/N: AP8886
New Open box - Never Used
Included
  • 1 x APC AP8886 2G Metered Rack PDU 32A 230V C13 C19 Power Distribution Unit ZeroU
Key Features
  • Output Connections
  • (12) IEC 320 C19
    (30) IEC 320 C13
  • Nominal Output Voltage: 230V
  • Nominal Input Voltage: 400V 3PH
  • Input Connections: IEC 60309 32 A 3P + N + E
  • Cord Length: 1.8meters
Rack PDU 2G, Metered, ZeroU, 22.0kW(32A) 17.3kW(24A), 230V, (30) C13 & (12) C19
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
Includes: Installation guide, Rack mounting brackets, Safety guide, Serial configuration cable
NetShelter Metered Rack PDUs Features & Benefits
Agility
  • Rack-Mountable - Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
  • Wide range of input and output connections - Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 17.3kW using a single branch whip.
  • Single input power source - Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
Availability
  • Remote Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Command Line Interface. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
  • Integrates with StruxureWare Data Center Expert - An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
  • Load indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.
  • Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
  • Local Current Monitoring Display - The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
  • Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Marketing features
  • Local Current Monitoring Display - The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
  • Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Specification
Output
  • Overload Protection: Yes
  • Maximum Total Current Draw: 32
Input
  • Input frequency: 50/60 Hz
  • Number of Power Cords: 1
  • Load Capacity: 22000VA
  • Maximum Input Current: 32A
  • Maximum Line Current: 32A
  • Power Cable Length: 6ft (1.8m)
Physical
  • Maximum Height: 1829MM, 182.9CM
  • Maximum Width: 56MM, 5.6CM
  • Maximum Depth: 51MM, 5.1CM
  • Net Weight: 11.55KG
  • Colour: Black
Environmental
  • Operating Temperature: 0 - 55 °C
  • Operating Relative Humidity: 5 - 95 %
  • Operating Elevation: 0 - 3048meters
  • Storage Temperature: -25 - 65 °C
  • Storage Elevation: 0 - 15240meters

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK

TH 248400

To request a price please fill out the form below...


Close