ADVA FSP150CP Optical Fibre Access Switch F150/BT-/CP/GIG/2AC 0078993005 + Ears
ADVA FSP150CP Optical Fibre Access Switch F150/BT-/CP/GIG/2AC 0078993005 + Ears
ADVA FSP150CP Optical Fibre Access Switch F150/BT-/CP/GIG/2AC 0078993005 + Ears
ADVA FSP150CP Optical Fibre Access Switch F150/BT-/CP/GIG/2AC 0078993005 + Ears
ADVA FSP150CP Optical Fibre Access Switch F150/BT-/CP/GIG/2AC 0078993005 + Ears

ADVA FSP150CP Optical Fibre Access Switch F150/BT-/CP/GIG/2AC 0078993005 + Ears

Product Brand: ADVA
Product Condition: Used
Excluding VAT: £38.00
Including VAT: £45.60
Information
ADVA FSP150CP Optical Fibre Access Switch F150/BT-/CP/GIG/2AC
0078993005 + Ears
Model No: FSP150CP
P/N: F150/BT-/CP/GIG/2AC
In Good Condition
In Full Working Order
Supplied With Rack Mount Ears
Included
  • 1 x ADVA FSP150CP Optical Fibre Access Switch F150/BT-/CP/GIG/2AC 0078993005 + Ears
Specification
Access capacity
  • Two ports:
    • one dedicated 100/1000BaseX (SFP) port
    • one 10/100/1000BaseT or 100/1000BaseX (SFP) port
Network interface
  • One 10/100/1000BaseT or 100/1000BaseX (SFP) port
  • Two 100/1000BaseX (SFP) ports
  • Two 10/100/1000BaseT or 100/1000BaseX (SFP) ports
  • One network port can be defined as an additional access port
Network interface redundancy
  • IEEE 802.1AX link aggregation - active/standby or load balancing
  • ITU-T G.8032 Ethernet ring protection
Synchronization
  • ITU-T G.8261 /G.8262 /G.8264 Synchronous Ethernet on all interfaces
  • Sync status message support
  • IEEE 1588v2 Precision Time Protocol
  • ITU-T G.8265.1 and G.8275.1 PTP Telecom Profile
  • BITS-in and BITS-out
  • BITS sync status messaging
  • 1 PPS in/out
  • 10MHz
VLAN support
  • 4096 VLANs (IEEE 802.1Q customer-tagged) and stacked VLANs (Q-in-Q service provider tagged)
  • 2-tag management (push/pop/ swap) for c-tag and s-tag
  • IEEE 802.1ad provider bridging (c-tag, s-tag)
  • Ethertype translation
  • 8 1,2 / 32 3-5/ 64 6-10 Ethernet virtual circuits (EVC)
  • 9612 Byte per frame MTU transparency
  • EoMPLS encapsulation
Layer 2 traffic management
  • Acceptable client frame policy: tagged or untagged
  • Service classification based on IEEE 802.1p, 802.1Q and IPTOS/DSCP
  • VLAN tag priority mapping (IEEE 802.1ad PCP encoding)
  • MEF-compliant policing (CIR/CBS/EIR/EBS) with threecolor marking and eight classes of service
  • Port shaping on transmit for both client and network ports
  • MEF 10.3 hierarchical policing with token-share envelopes
  • DiffServ supporting WFQ/SP mix
Layer 3 traffic management
  • L2-L4 access control lists (ACL) for classification
  • VRF-lite virtual routing and forwarding supporting IPv4 and IPv6
  • BGP and OSPF dynamic routing
  • DHCP relay agent
  • DCSP remarking
Operation, administration and maintenance (OAM)
  • IEEE 802.3ah EFM-OAM link management
  • IEEE 802.1ag connectivity fault management (CFM) with hardware assistance
  • ITU-T Y.1731 performance monitoring
  • ITU-T Y.1564 service activation testing
  • Terminal and facility loopbacks on port- and EVC-level for all interfaces
  • Cable diagnostics with benchmarks (electrical interfaces only)
  • Embedded RFC 2544 test generator and analyzer (ECPA)
  • MEF-compliant Layer 2 control protocol disposition and extensive filter options for Layer 2 packet types
  • Link loss forwarding to signal local link and network path failures
  • Dying gasp message for power failure alarming (EFM-OAM and SNMP trap option)
  • Port mirroring (local and remote)
Performance monitoring
  • RFC 2819 RMON Etherstats on a per-port and per-service basis
  • 15-minute and 1-day performance data bins
  • IEEE 802.3ah/ITU-T G.8021 PHY level monitoring
  • ITU-T Y.1731 single- and dual-ended frame loss measurement
  • Synthetic frame loss and delay measurement for multipoint service monitoring
  • TWAMP sender/reflectors for L3 based service assurance
  • Multi-CoS monitoring on EVCs scaling up to 32/ 64/ 128 simultaneous SOAM flows
  • Threshold-setting and threshold-crossing alerts
  • Physical parameter monitoring for SFP optics, including TCAs
  • Temperature monitoring and thermal alarms
ConnectGuard security
  • L2 MACsec encryption at line rate on a per-EVC basis
  • End-to-end encryption mode with one or two VLAN tags transmitted in the clear
  • Robust AES encryption algorithm (AES-128 /AES-256)
  • Key distribution based on IEEE 802.1X
  • Diffie-Hellmann key exchange process (2048 / 4096 bits)
  • Tamper resistant and evident enclosure
  • Full interoperability with all FSP 150 ConnectGuard enabled products
Low-touch provisioning
  • DHCP/BOOTP auto-configuration
  • IEEE 802.1x port authentication (supplicant and authenticator)
  • Text-based configuration files
  • TFTP/SCP for software image upgrade and configuration file copy
Management and security
  • Local management
  • Serial connector (RJ45) using CLI
  • Local LAN port (RJ45) using CLI, SNMP and Web GUI interfaces
  • USB (Type B Micro) using CLI1
  • USB (Type B Mini) using CLI2
  • 3G/ LTE/WiFi USB interface
Remote management
  • Maintains in-band VLAN and MAC-based management tunnels
  • Fully interoperable with other FSP 150 products
Management protocols
  • IPv4 and IPv6 DCN protocol stacks, including dual-stack operation and 6-over-4 tunnels
  • Telnet, SSH (v1/v2), HTTP/HTTPS, SNMP (v1/v2c/v3)
  • NETCONF/YANG, OpenFlow
Secure administration
  • Configuration database backup and restore
  • System software download via FTP, HTTPS, SFTP or SCP (dual flash banks)
  • Remote authentication via RADIUS/TACACS
  • SNMPv3 with authentication and encryption
  • IPsec on management traffic
  • Access control list (ACL)
IP routing
  • DHCP, RIPv2 and static routes, ARP cache access control
System logging
  • Alarm log, audit log and security log
Environmental
  • Dimensions (W x H x D): 443mm x 44mm x 208mm/17.4 " x 1.7" x 8.2"
  • Operating temperature:
    • 0°C to +45°C/ 32°F to 113°F
    • -40°C to +70°C/-40°F to 158°F (hardened environment)
  • Storage temperature: -40°C to +70°C/-40°F to 158°F (GR63-CORE)
  • Humidity: 5 to 95%, B1 (non-condensing)
  • Power supply:
    • Fixed, redundant PSUs, 110/240VAC, -36 to 72VDC with over-voltage and over-current protection
    • PSU5,8-10: 110/240VAC, -48 to -72VDC or +24 to +30VDC with over-voltage and over-current protection
  • Power consumption:
    • Nominal: 6.5W1, 12,5W 2, 19W3,4, 21W5, 23W6,7, 24W8,30W9
    • Maximum: 10W1, 15W 2, 23W3,4, 25W5 ,28W6,7, 29W8,35W9
  • Dry-contact environmental alarm inputs
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by
purchasers in the EU (excluding UK) who are VAT registered
TH 202595

To request a price please fill out the form below...


Close