2 x MD1200 4 x 0.5M SAS cables 1 x H810 ex VAT with shipping

Product Brand: Dell
Product Condition: Used
Excluding VAT: £1,060.84
Including VAT: £1,273.01
2 x MD1200 4 x 0.5M SAS cables 1 x H810 with shipping

In good condition and full working order - 12 months Warranty


  • 2 x Dell PowerVault MD1200 12-Bay SAS Storage Array Chassis each with
  • 12 x SAS/SATA 3.5" caddies
  • 2 x Redundant Controllers
  • 2 x Power Supplies 0F884J
  • The MD1200 can be used an expansion array for the MD3200/MD3200i, or can be connected directly to a server using a PERC H800/H810 controller

Dell™ PowerVault™ MD1200 direct-attached storage enclosure offers versatility and high-capacity storage for mainstream applications with optimal performance in sequential (streaming) applications.
Seamless server and primary storage expansion for 6Gb/s SAS environments
Supports mainstream and capacity-intensive applications such as email, backup to disk and video streaming
Versatility for investment protection and data tiering
Support for the following configurations:
Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H800 (4 enclosures per port, single path)
Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H800 (4 enclosures connected to both ports via redundant path cabling)
Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11.
2 Enclosure Management Modules(EMM) provide redundant enclosure management capability
Back-Panel Connectors
SAS connectors (per EMM)
1 SAS (SFF 8088) "IN" connector for connection to the host
1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure
Serial connector (per EMM)
1 6-pin UART mini-DIN connector (for factory use only)
LED Indicators
Front panel
1 two-color LED indicator for system status
2 single-color LED indicators for power and split mode
Drive carrier
1 single-color activity LED
1 two-color LED status indicator per drive
3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status
1 single-color Unit Identification LED for each EMM
Power supply/cooling fan module
3 LED status indicators for power supply status, power supply/fan fault and AC status
Two fully redundant power supplies; supports DC power
Wattage: AC - 600 W; DC - 700 W
Heat dissipation: AC - 2047BTU/hr; DC - 2388 BTU/hr
Voltage: 100-240 VAC, auto sensing; 48V DC
Frequency: 50/60 Hz
Amperage: 8.6 A at 100 V, 4.3 A at 240 V
Available Drive Power (per slot)
Supported drive power consumption (continuous):
up to 1.16 A at +5V
up to 1.6 A +12V
8.7cm (3.43 inches)
48.2cm (18.98 inches)
59.4 (23.39 inches)
28.39 kg (62.6 lb) (maximum configuration)
8.84 kg (19.5 lb) (empty)
Environmental Operating Conditions
Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour
Supports Fresh Air cooling, up to 35 degrees Celsius
Relative humidity:
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)
Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)
Operating System
Refer to RAID Card for details on supported Operating Systems:

LA 851810x146gb 10k, 36713 10x146gb 10k, 36711 10x146gb 15k, 36712 10 x 146Gb 15k DUP x7

To request a price please fill out the form below...